Unique Enamelling Vitreous Enamel Services Ltd Ribchester Lancashire UK

For lovers of cast iron baths

Vitreous Enamel Cast Iron Baths
Vitreous Enamel The Process
Cast Iron Baths for Sale
Bath Taps Bath Fittings Restorations
Vitreous Enamelling Terms And Conditions
Contact Unique Enamelling Services Ltd UK

Vitreous Enamellers Of Cast Iron Baths

Our Standard Trading Conditions

Suitability of Cast

All baths must be free from structural defects (e.g. cracks), and be as rust free as possible. Some baths which are discovered to be cracked, can sometimes be repaired at additional cost.

Lead Times

Unless special arrangements have been made the normal turnaround is 2 to 3 weeks.

Transport

We can collect and deliver, within a 100 mile radius of our workshops in Ribchester. For areas further afield please contact us. Alternatively Martin Brothers (Nationwide Specialist Transport) can be contacted on 01985 844144 for a quote, or Shunters Transport on 01289 330472.

Fittings

All fittings must be removed prior to delivery/collection. Failure to remove fittings may result in a total loss of such fittings.

Finished Result

Please note that as much as we try, the finished article may not necessarily appear as good as new. As the vitreous enamel will follow the contours of the bath, there are bound to be undulations within the surface. Also, owing to the very high temperatures achieved, tiny black specks, slight crazing and some slight pin holing may occur. This is unavoidable when working with old casts that can be up to 100 years old. If any of these symptoms do show, this is quite natural and has no detrimental effect.

Guarantee

Subject to PAYMENT IN FULL on collection/delivery, Unique Enamelling Services Ltd gives a LIFETIME GUARANTEE that the vitreous enamel applied will never peel off.

 

 

Fitting Instructions

Please advise the plumber fitting the bath not to over tighten the fittings. This will avoid putting too much stress on the new vitreous enamel or causing it to split.

1. When filling the bath, ALWAYS turn the cold tap on first.
2. After use, wash the bath out, using liquid detergent only.
3. Never use abrasive cleaners such as powder or paste cleaners.
4. Never use acidic based cleaners such as new Bathroom Flash.
5. Always dry the bath after use to prevent water marks forming.
6. If the taps begin to leak, have them re-washered as soon as possible.
7. Avoid placing glass or heavy objects over or on the bath, as impact damage may be caused if these fall into the bath.
8. Avoid the use of appliances with suction pads, as these will form marks on the bath surface.

We accept all major credit cards
We accept all major credit cards

 

unique enamelling home page | vitreous enamelling process | cast iron enamelled baths for sale | taps and bath fittings
terms & conditions | contact unique enamelling services ltd
XML Sitemap
Site by Ascot Studios - © 2005 Unique Enamelling Services Ltd - UK Cast Iron Antique Baths Restoration Enamellers Vitreous Enamel